How to keep the wooden floor damp 1

  • Detail

Wood flooring is the favorite of people in modern home decoration. Wood flooring generally has a very rich color and texture of logs, which not only highlights the decorative effect, but also gives people a very comfortable feeling. However, the paving of wood flooring also has very high requirements for the environment, and the paving environment can't be too dry or too wet. What if the wood flooring becomes damp in the paving process? How to damp proof it

1. Prevent it before installing the floor. Before laying the wooden floor, it is recommended to lay asphalt and linoleum paper on the bottom of the wooden floor, and then seal a layer of cement on the surface to prevent the release of harmful gases. It is also a good way to prevent the floor from getting damp. In addition, after spraying insect proof powder on the dry ground, lay a thick moisture-proof membrane, because the thickness of the moisture-proof membrane is generally about 5-10mm, which can effectively prevent the infiltration of underground moisture. Then lay a layer of activated carbon. Don't underestimate the activated carbon, which can absorb moisture and prevent insects, and fully prevent the floor from being affected by moisture

2. The surface of the wooden floor should be well protected against moisture at the bottom, and then the surface of the wooden floor should be protected against moisture. The easiest way is to wax our wooden floor. Waxing can not only make up for the scars left on the wooden floor in our daily life, improve the brightness of the floor, but also has the function of waterproof and moisture proof

3. There is a magic weapon for preventing spots on wooden floors. If your moisture-proof measures are not done well, there are ways. First, the first magic weapon is the dehumidifier. Dehumidifier is the natural enemy of wet weather. Its emergence has brought hope to our family and a sunny world. Unfortunately, the price is relatively high, and there should be a place for it. But turn on the dehumidification function of the air conditioner, and the moisture-proof effect is also good

4. If you find that the wooden floor is moldy, you can dilute it with bleach of soft nature in the ratio of 1:3, and then wipe it clean with a rag, and the wooden floor will return to its original state! Of course, it is better for consumers to take such moisture-proof measures when paving wooden floors





Copyright © 2011 JIN SHI